Schoeps CMIT 5 Boom Setup
Package Includes:
- Scheops CMIT5U Shotgun Mic
- Rycote Full Windshield Kit 4
- Rycote Connbox 1
- W140 Foam Windscreen
- Boom Pole
Schoeps CMIT 5
$100.00
The blue Schoeps CMIT 5U is a short, lightweight shotgun condenser microphone designed to deliver accurate close and distant capture of dialog and musical instruments for boom operators, audio engineers, and musicians in film, television, and video production as well as music recording applications. Its supercardioid/lobe-shaped polar pattern yields precise directionality, high immunity to wind noise, and low coloration at the off-axis sections of the capsule.
Multiple filter settings allow you to tailor the 40 Hz to 20 kHz frequency response to suit different environments and scenarios. A 40 Hz roll-off is active without any filter selection; the switches provide low-cut filters at 80 Hz or 300 Hz for management of proximity effect and handling noise, while a selectable high-frequency boost at 10 kHz enables increased vocal clarity and compensation for high-frequency loss caused by windscreens.
LED indicators provide a reading of settings in low light and the settings are retained after power down. No batteries are required as the CMIT 5U is operated via 48V phantom power
Description
Additional information
| Sound Field | Mono |
|---|---|
| Transducer | Condenser |
| Polar Pattern | Supercardioid |
| Frequencey | 40 Hz to 20 kHz |
| Equivalent Noise Level | 14 dB A-Weighted |
| Impedance | 50 Ohms |
| Load Impedance | 600 Ohms |
| Sensitivity | 17 mV/Pa |
| Low Cut Filter | 18 dB/Octave @ 80 Hz |
| Output Connectors | 1 x 3-Pin XLR |
| Operating Voltage | 48 V ± 4 V |
| Weight, Length, Diameter | 3.14 oz / 89 g, 9.88" / 251 mm, 0.83" / 21 mm |
Reviews
There are no reviews yet.