Astera FP1 Titan Tube, Set of 8
The ultimate film lighting tube for TV, cinema, and photography
Film Lighting Tube | Titan Tube was specially designed for the Film, Broadcasting and Cinema industries. Optimized for an ultra-high TLCI, a very high CRI and peak brightness, colors as well as Hue, Saturation and Intensity can be set directly on the tube. In addition, the Titan Tube now accepts wired DMX via a special power/data combination cable.
• Max. 20h
• Wireless DMX
16 individually controllable pixels
With a range from 1,750K to 20,000K.
Ultra High Color Rendering
TLCI >=96, CRI >=96, CRI Re>=90 from 3200K to 6500K
2h Boost Mode
2.8x the brightness in white for almost 2h (compared with AX1).
Quick access to DMX setup, colors, and hue, saturation, intensity control.
Wired Data Connection (+Wireless DMX)
DMX, Art-Net, sACN, and power can be distributed via the PowerBox
Custom holders, stands, etc. allow easy fixation for any production
A smart control system of your Film Lighting Tube, where Infrared remote, wireless DMX and app work together to enable big setups that can be set up, monitored and adjusted in a fast and convenient way. Film Lighting Tube
App control (UHF)
Create complex programs out of colors, effects, and settings. The Titan Tube will remember and repeat these effects without requiring a constant wireless link. Quickly create groups of lights, assign positions and select which the Film Lighting Tube should receive commands.
Keep a complete overview of the status and all settings of your PixelTube while you operate them. View battery status, radio signal, DMX address and which lights you have targeted. Diagnose individual Titan Tube or Astera Event Spotlights and even get informed if a light is being moved or switched off. This works while you control lights by the app but also if Titan Tubes are controlled via DMX.
Set up your Film Lighting Tube conveniently out of the distance. Set DMX address and DMX footprint for one or several Titan Tube or Wireless Event Spotlights; 50 units can be prepared in less than 5 minutes out of the distance. After your job, do a quick master reset of all settings or a partial one of only selected settings.
Wireless DMX (2.4GHz)
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Astera Titan Tubes can be controlled by LumenRadio CRMX transmitters and also by W-DMX from wireless solutions (up to G4S). This Battery Operated film lighting tube support both wireless DMX standards so you can use them together with almost all other wireless lights and transmitters.
IR Remote Control
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights. When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
The PowerBox is an efficient tool to wire your Titan Tubes during jobs with power and data whenever you don’t want to use them wirelessly. In addition, the PowerBox can be stored inside the Titan Tube Charging case so you can charge your tubes after a job inside the case without having to remove tubes or PowerBox.
The PowerBox has a powerCON True1 input and output and a 5-pin XLR input and output. Furthermore, it has an RJ45 port for Art-Net and sACN and converts the signals to DMX.
Up to 10 Titan Tubes can be connected to each PowerBox with a special power+data cable. The maximum cable length is 15m.
The PowerBox is designed to be placed on a floor or hung in a truss. It has a 3/8″ thread that can be removed to allow 1/2″ clamps to be attached (same as AX5). In addition, it has holes for safety leashes.
Functions unique to Titan Tube
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your production and be sure that your lights won t run out while still getting the maximum brightness.
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Scrambled PWM technology to avoid flickering when filming.
Adjust green/magenta during content creation to reduce postproduction work.
Switch lights into power-saving standby and schedule them to wake up when the production starts.
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Switches to white light when AC power is cut to keep your event save
The lights give a visual and audible alarm and send a notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
The AsteraApp is packed with many additional items and new features are frequently added via software update.
Red, Green, Blue, Mint, Amber
|Total LED Power|
|Emittance at 1m|
|Backside Display with HSI control|
Supported via Astera PowerBox
CRMX & others, excluding W-DMX G5, City Theatrical
LG Chem Lithium-ion
70% after 300 cycles
Up to 20 hours
|Charging Time (nominal)|
Polycarbonate, metal end cap
0 to 40 deg. C (32 to 104 deg. F)
Astera ARCI, AsteraBox, CRMX Nova TX, W-DMX Transmitter
Tube Light: 1.6 x 40.7" (40.64 x 1033.78mm)
Tube Light: 24 lbs (10.89kg) (for 8 Bulbs)